A mass balance study of the phytoremediation of perchloroethylene-contaminated groundwater

A mass balance study was performed under controlled field conditions to investigate the phytoremediation of perchloroethylene (PCE) by hybrid poplar trees. Water containing 7–14 mg L^?1 PCE was added to the test bed. Perchloroethylene, trichloroethylene, and cis-dichloroethylene were detected in the effluent at an average of 0.12 mg L^?1, 3.9 mg L^?1, and 1.9 mg L^?1, respectively. The total mass of chlorinated ethenes in the water was reduced by 99%. Over 95% of the recovered chlorine was as free chloride in the soil, indicating near-complete dehalogenation of the PCE. Transpiration, volatilization, and accumulation in the trees were all found to be minor loss mechanisms. In contrast, 98% of PCE applied to an unplanted soil chamber was recovered as PCE in the effluent water or volatilized into the air. These results suggest that phytoremediation can be an effective method for treating PCE-contaminated groundwater in field applications.     

Are politicians office or policy motivated? The case of U.S. governors' environmental policies

Are elected politicians primarily motivated by holding office, thus choosing environmental policies accordingly? Or are they motivated by the chance to implement their preferred environmental policies? Do governors have character, in the sense that they promise and implement environmental policies consistent with their own preferences? To answer these questions, we study the differences in environmental spending across both re-electable and lame duck governors from the two main political parties. In our empirical analysis, we make use of parametric and non-parametric regression-discontinuity approaches. While re-electable governors do not set significantly different policies, lame duck governors do. We argue that in the area of environmental policy governors appear to be primarily office motivated and lack character.     

Simultaneous CO2 injection and water production to optimise aquifer storage capacity

The estimates for geological CO₂ storage capacity worldwide vary, but it is generally believed that the capacity in saline aquifers will be sufficient for the amounts of CO₂ that will need to be stored. The effort required to select and qualify a geological storage site for safe storage will, however, be significant and storage capacity may be a limited resource regionally. Both from a economic and resource management perspective it is therefore important that potential storage sites are exploited to their full potential.In static capacity estimates, where the maximum stored amount of CO₂ is given as a fraction of the formation pore volume, typically arrive at efficiency factors in the range of a few per cents. Recent work has shown that when the dynamic behaviour of the injected CO₂ is taken into account, the efficiency factor will be reduced because of the increase in pore pressure in the region around the injection well(s). The increase in pore pressure will propagate much further than the CO₂. The EU directive on geological CO₂ storage specifically addresses the restriction that will apply when different storage sites are interacting due to pressure communication. Consequently, the pore pressure increase at the boundary of the storage license area will be an important limiting factor for the amount of CO₂ that can be injected.One obvious method to control the pore pressure is to produce water from the aquifer at some distance from the CO₂ injection wells. This paper discusses results from simulations of CO₂ injection in two aquifers on the Norwegian Continental Shelf; the Johansen aquifer and the southern part of the Utsira aquifer. These aquifers are candidates for injection of CO₂ shipped out via pipeline from the Norwegian West Coast. The injected amounts of CO₂ over a period of 50 years are 0.518 Gtonne for the Johansen aquifer and 1.04 Gtonne for the Utsira aquifer.Several design options for the injection operations are investigated: Injection of CO₂ without water production; injection into several wells to distribute the injected fluids and reduce the local pressure increase around each injection well; and injection with simultaneous production of water from one or more wells. The boundaries of the aquifer formations are assumed closed in all simulations. The possible consequences of other types of boundary conditions (semi-closed or open) are briefly discussed.     

Determinants of maternal and fetal exposure and temporal trends of perfluorinated compounds

In recent years, some perfluorinated compounds (PFCs) have been identified as potentially hazardous substances which are harmful to the environment and human health. According to limited data, PFC levels in humans could be influenced by several determinants. However, the findings are inconsistent. In the present study, perfluorooctane sulfonate (PFOS), perfluorooctanoic acid (PFOA), and perfluorononanoic acid (PFNA) were measured in paired maternal and cord serum samples (N?=?237) collected between 1978 and 2001 in Southern Sweden to study the relationship between these and to investigate several potential determinants of maternal and fetal exposure to PFCs. Time trends of PFCs in Swedish women were also evaluated. The study is a part of the Fetal Environment and Neurodevelopment Disorders in Epidemiological Research project. PFOS, PFOA, and PFNA levels (median) were higher in maternal serum (15, 2.1, and 0.24 ng/ml, respectively) than in cord serum (6.5, 1.7, and 0.20 ng/ml, respectively). PFC levels were among the highest in women originating from the Nordic countries and the lowest in women from the Middle East, North Africa, and sub-Saharan Africa. Multiparous women had lower serum PFOA levels (1.7 ng/ml) than primiparous women (2.4 ng/ml). Maternal age, body mass index, cotinine levels, and whether women carried male or female fetuses did not affect serum PFC concentrations. Umbilical cord serum PFC concentrations showed roughly similar patterns as the maternal except for the gestational age where PFC levels increased with advancing gestational age. PFOS levels increased during the study period in native Swedish women. In summary, PFOS levels tend to increase while PFOA and PFNA levels were unchanged between 1978 and 2001 in our study population. Our results demonstrate that maternal country of origin, parity, and gestational age might be associated with PFC exposure.     

Life cycle assessment and environmental improvement of residential and drinking water supply systems in Hanoi,Vietnam

In many Asian cities the public water supply is characterised by low pressure, frequent interruptions and occasional contamination. Hence, private households have to store water and increase pressure individually to ensure an uninterrupted supply at sufficient pressure and water for drinking has to be boiled or supplied separately in bottles. In this study the present water supply system in Hanoi and a number of modification options were analysed from an environmental point of view through life cycle assessment (LCA) in order to identify the most sustainable solutions for future water supply. It was found that the boiling of water for drinking was the largest source of impacts in the present system. Impacts could be reduced significantly if the public supply network was improved and private pumping and storage could be avoided and if the water could be used directly for drinking. It was also found that impacts could be reduced if consumers used bottled water for drinking instead of boiling tap water. Finally, it was demonstrated that even if drinking water cannot be supplied directly through the public network, a reliable public water supply at high pressure is environmentally advantageous. Sensitivity analyses revealed that the conclusions of this study are likely to be applicable to other cities with similar water supply systems.     

Knowledge Production and Learning for Sustainable Landscapes: Seven Steps Using Social–Ecological Systems as Laboratories

There are multiple challenges regarding use and governance of landscapes’ goods, functions and intangible values for ecosystem health and human well-being. One group of challenges is to measure and assess principal sustainability dimensions through performance targets, so stakeholders have transparent information about states and trends. Another group is to develop adaptive governance at multiple levels, and management of larger geographical areas across scales. Addressing these challenges, we present a framework for transdisciplinary research using multiple landscapes as place-based case studies that integrates multiple research disciplines and non-academic actors: (1) identify a suite of landscapes, and for each (2) review landscape history, (3) map stakeholders, use and non-use values, products and land use, (4) analyze institutions, policies and the system of governance, (5) measure ecological, economic, social and cultural sustainability, (6) assess sustainability dimensions and governance, and finally (7) make comparisons and synthesize. Collaboration, communication and dissemination are additional core features. We discuss barriers bridges and bridges for applying this approach.     

Sustained Yield Forestry in Sweden and Russia: How Does it Correspond to Sustainable Forest Management Policy?

This paper analyzes how sustained yield (SY) forestry is defined and implemented in Sweden and Russia, two countries with different forest-industrial regimes. We first compare definitions of SY forestry in national legislation and policies. Then we study forest management planning in two large forest management units with respect to: delivered forest products and values, how the harvest level of timber is defined, where the harvest takes place, and what treatments are used to sustain desired forest products and values. In Sweden SY forestry is maximum yield based on high-input forest management, and in Russia it is forestry based on natural regeneration with minimum investments in silviculture. We conclude that how SY forestry contributes to SFM depends on the context. Finally, we discuss the consequences of SY forestry as performed in Sweden and Russia related to its ability to support diverse forest functions, as envisioned in sustainable forest management policy.     

Legal Framework for Biosphere Reserves as Learning Sites for Sustainable Development: A Comparative Analysis of Ukraine and Sweden

The Biosphere Reserve (BR) concept aims at encouraging sustainable development (SD) towards sustainability on the ground by promoting three core functions: conservation, development, and logistic support. Sweden and Ukraine exemplify the diverse governance contexts that BRs need to cope with. We assessed how the BR concept and its core functions are captured in national legislations. The results show that the core functions are in different ways reflected in legal documents in both countries. While in Ukraine the BR concept is incorporated into legislation, in Sweden the concept is used as a soft law. In Ukraine managers desired stronger legal enforcement, while in Sweden managers avoided emphasis on legislation when collaborating with local stakeholders. Hence, BR implementation have adapted to different political cultures by development of diverse approaches. We conclude that a stronger legal support might not be needed for BRs, rather SD needs to be recognized as an integrated place-based process at multiple levels.     

SO2 emission measurement with the European standard reference method,EN 14791, and alternative methods – observations from laboratory and field studies

EN 14791 is a European Standard Reference method for the measurement of SO₂ in emissions. This standard is based on a wet-chemical method in which SO₂ present in flue gases is absorbed into an absorption solution containing hydrogen peroxide, and analyzed as sulfates after sampling. This study presents the results obtained when three portable automated measuring systems (P-AMS), based on Fourier-transform infrared (FTIR) spectroscopy, non-dispersive infrared (NDIR) and ultraviolet-fluorescence (UV) techniques, were compared to the Standard Reference Method for SO₂ (EN 14791) in order to verify whether they could be used as alternative methods (AM) to EN 14791. In the case of FTIR, the measurements were performed from hot and wet gas, without any conditioning. UV-fluorescence analyzers were equipped with dilution probes and one NDIR applied a permeation dryer, whereas the other had a chiller. Tests were carried out at concentration ranges from 0 to 200 mg/m³(n) and from 0 to 800 mg/m³(n) for testing of equivalency according to CEN/TS 14793 using a test bench. Equivalency test criteria were met for all tested P-AMS except for NDIR at the lower range. The SO₂ results measured with NDIR and the chiller were lower compared to the set-up with NDIR and permeation. This was most probably due to the chiller causing absorption of SO₂ in the condensate. Tests were also carried out at field conditions, measuring the SO₂ emissions from a boiler combusting mainly bark. The same phenomena were observed in these tests as during the test bench study, i.e. the measurement set-up with NDIR and the chiller gave the lowest results. These data demonstrated that the tested alternative methods (FTIR, UV-fluorescence, and NDIR) could be used instead of the standard reference method EN 14791, thus providing real-time calibration of automated measuring systems. It must however be emphasized that when measuring water-soluble gases, such as SO₂, the choice of suitable conditioning technique is critical in order to minimize losses of the studied component in the condensate.

Implications: Portable automated measuring systems (P-AMS) provide real-time information about emissions and their concentrations, thus offering significant advantages compared to wet-chemical methods. This study presents results which can be used as a validation protocol to show that the tested P-AMS techniques (FTIR, NDIR, UV-fluorescence) could be used instead of EN 14791 (CEN 2017a) as alternative methods (AM), when paying attention to the selection of an appropriate conditioning technique.     

Norwegian Testing of Emulsion Properties at Sea--The Importance of Oil Type and Release Conditions

This paper is a review of the major findings from laboratory studies and field trials conducted in Norway in recent years on the emulsification of oils spilled at sea. Controlled bench-scale and meso-scale basin experiments using a wide spectrum of oils have revealed that both the physico-chemical properties of the oils and the release conditions are fundamental determinants of the rate of emulsion formation, for the rheological properties of the emulsion formed and for the rate of natural dispersion at sea.During the last decade, several series of full-scale field trials with experimental releases of various crude oils have been undertaken in the North Sea and the Norwegian Sea. These have involved both sea surface releases, underwater pipeline leak simulations (release of oil under low pressure and no gas) and underwater blowout simulations (pressurized oil with gas) from 100 and 850 m depth. The field trials have been performed in co-operation with NOFO (Norwegian Clean Seas Association for Operating Companies), individual oil companies, the Norwegian Pollution Control Authority (SFT) and Minerals Management Services (MMS). SINTEF has been responsible for the scientific design and monitoring during these field experiments. The main objectives of the trials have been to study the behaviour of different crude oils spilled under various conditions and to identify the operational and logistical factors associated with different countermeasure techniques.The paper gives examples of data obtained on the emulsification of spilled oil during these field experiments. The empirical data generated from the experimental field trials have been invaluable for the validation and development of numerical models at SINTEF for predicting the spreading, weathering and behaviour of oil released under various conditions. These models are extensively used in contingency planning and contingency analysis of spill scenarios and as operational tools during spill situations and combat operations.